SmallRig 5305 Potato Jet TRIBEX SE – hydraulic video tripod with X-Clutch technology and fluid head

Description

SmallRig 5305 Potato Jet TRIBEX SE — full technical specifications

Legs and structure

Fluid head

Weight and contents

Package contents

X-Clutch Technology: How Hydraulic One-Second Deployment Works

On a conventional video tripod, extending the legs, adjusting the angle, and leveling require three separate operations: releasing each leg individually, adjusting to the desired angle, and then locking them back into place. The TRIBEX SE's hydraulic X-Clutch system combines all three into a single action: a squeeze of the hydraulic lever simultaneously releases all three legs, which then lower to the selected angle under their own weight and lock automatically upon release. The result is a fully extended and stable tripod in less than a second. The three available angles—22°, 55°, and 81°—cover everything from standard shots to close-up positions, and the system also allows the legs to be extended to 90° for overhead or extreme ground-level shots.

Dual compatibility with DJI RS and Manfrotto 501PL: tool-free gimbal/tripod switching

The TRIBEX SE's quick-release plate directly accepts DJI RS series plates and the Manfrotto 501PL standard—the two most widely used systems in the professional film and video segment. This eliminates the need to adapt or swap plates when switching between gimbals and tripods during filming. The integrated flat-head screw allows for one-finger camera installation and removal, without the need for an additional Allen wrench for basic mounting. The 1/4"-20 holes on the head allow for attaching magic arms and other accessories directly to the tripod.

Is the SmallRig 5305 Potato Jet TRIBEX SE the tripod you need?

It's for you if…

• You work outdoors with frequent changes in position and need to deploy the tripod in seconds without losing stability — X-Clutch technology is designed exactly for that use.
• You use a DJI RS gimbal and want to be able to switch to a tripod without adapting plates: the dual compatibility of DJI RS and Manfrotto 501PL eliminates that step from the workflow.
• You travel with your gear in a standard cabin or checked bag: folded to 72 cm it fits in 71 cm suitcases — the usual airline limit for large hand luggage.
• Your camera with optics weighs up to 6 kg: the fluid head supports that load with a preset fixed counterweight of 4 kg for controlled panning movements.

It's not for you if…

• You need an adjustable counterweight for different camera and lens setups: the TRIBEX SE's counterweight is fixed at 4 kg — if your setup varies a lot in weight, a head with a variable counterweight will be more suitable.
• Your camera weighs over 6 kg: the fluid head capacity is 6 kg — for higher loads you will need a higher category tripod.
• Looking for maximum lightness? 3.7 kg is a reasonable weight for a hydraulic video tripod, but if weight is the main factor, there are lighter carbon fiber options — including the carbon fiber version of TRIBEX itself.

Warranty and technical service for the SmallRig 5305 Potato Jet TRIBEX SE

• Official SmallRig Warranty
• Specialized technical support: pre-sales and post-sales advice at Galaxyandorra.
• Returns: Returns policy for online purchases in accordance with applicable regulations.
• Delivery: Shipping to Spain, France, and Portugal with tracking. Check availability at Galaxyandorra.

Frequently Asked Questions about the SmallRig 5305 Potato Jet TRIBEX SE

What is the X-Clutch technology of the SmallRig TRIBEX SE and how does it work?

The X-Clutch is a hydraulic system that allows you to extend, adjust the angle, and lock all three tripod legs simultaneously with a single movement—a squeeze of the hydraulic lever releases the legs, which then drop to the selected angle and lock automatically upon release. Full deployment takes less than a second, compared to several minutes for a conventional tripod with individual leg locks.

Is the SmallRig TRIBEX SE 5305 compatible with DJI RS boards?

Yes. The TRIBEX SE quick-release plate directly accepts DJI RS series plates and the Manfrotto 501PL standard without additional adapters. This allows you to switch between a DJI RS gimbal and a tripod without changing or adapting plates during filming.

What is the load capacity of the SmallRig 5305 TRIBEX SE?

The fluid head supports up to 6 kg with a preset 4 kg fixed counterweight for optimal balance. The legs have a maximum load capacity of 15 kg. The counterweight is fixed—not adjustable—making it ideal for camera setups with lenses weighing around 4 kg.

Does the SmallRig TRIBEX SE fit in an airplane carry-on suitcase?

When folded, it measures 72 cm in length. Most 28-inch hard-shell carry-on suitcases have an interior dimension of 71-73 cm, so the tripod fits snugly. It will not fit in standard cabin carry-on suitcases (55 cm) — it will need to be checked in or transported in a separate carrier bag.

What is the difference between the SmallRig TRIBEX SE and the carbon fiber version?

The SE model (reference 5305) is made of aluminum alloy and is the most affordable version in the TRIBEX range. The carbon fiber version offers lower weight while maintaining the same head and X-Clutch system specifications, at a higher price. Load capacity, height, and leg angle specifications are identical in both versions.